Custom Water Tanks for Articulated AND RIGID FRAME trucks
Our Tanks Bring Water Where You Need It!
We build custom built water tanks for all makes and models of off road and on road trucks.
Our tanks are welded inside and out to maximize strength and endurance and minimize leaks and cracks.
All water tanks have a 2 year manufacturer’s warranty for workmanship, and all components, such as water pump, spray heads and hydraulic motor carry the manufacturer’s warranty. We also stock all the components for the water tanks so you never have down time due to parts not being available.
Offering a Variety of Tanks to Meet Your Specific Needs…
ARTICULATED TANKS
For articulated chassis from 5,000 gallons to 9,000 gallons
RIGID FRAME TANKS
For rigid frame chassis from 10,000 gallons to 24,000 gallons
Experience the Advantage Custom Water Tank Difference…
- All tank production is performed in house for better quality control and efficiency
- All bends and breaks along with CNC cutting and processing of baffles and bulkheads etc.
- Capacity to produce 6 tanks at one time
- Capacity to build water tanks for articulated, on-road and rigid frame trucks
- Tank sizes up to 24,000 gallons
- Tanks are designed to fit all makes and models of chassis.
Resources
Quality from Design to Delivery
Design and 3D Modeling
Each of our tanks initially takes form through design and 3D modeling. Using the latest computer-aided engineering and design technologies allows Advantage to manufacture our tanks to the exacting design and functional standards of our customers.
Fabrication
During fabrication, we begin transforming raw steel sheets into our tank components – including making extremely precise cuts and shaping the steel as required by the design phase.
Tank Weld & Assembly
After fabrication is complete, each tank is assembled by hand – pulse welded inside and out to maximize strength and endurance and minimize leaks and cracks. All Advantage Water Tank welds are continuous, rather than spot welds.
Finishing and Installation
Tanks now move to the finishing phase where they are painted and outfitted with high-quality water pumps, hoses, cannons, valves, spray heads, and fittings. Installation of tanks onto the truck chassis can occur at our facility or we transport the tank and provide customers with a quick and easy self-installation kit.
Service After the Sale
Once you’ve taken delivery, our commitment to your satisfaction continues. Our experts are available to answer questions and assist with any issues. All tanks carry a 2-year manufacturer’s warranty for workmanship, and all components, such as water pump, spray heads and hydraulic motor carry the manufacturer’s warranty. We also stock all tank components so you’ll never have down time due to parts not being available.
Detailed Specs
- Water Tank Construction
- Water Tank Construction for Off Road Trucks
- Standard Components (Air System)
- Tank Installation
-
All holes for piping through tank are plasma cut for precise fit allowing for uniform welds
-
Pulse welding allows us to get 100% penetration at a lower temperature which causes less flexing of the steel
-
Tanks is welded inside out
-
All welds are continues with not spot welding
-
Tanks are installed and tested at our facility in Plant City, FL
- 5,000 & 6,000 Gallon Tank: Top, sides & end plates 1/4” A36 Steel Plate
- 7,000 & 8,000 Gallon Tank Top & Side 1/4” A36 Plate End Plates 3/8” A36 Steel Plate
- 7,000 & 8,000 Gallon Tank 4” Channel Stiffeners On Front End Plate For Added Strength
- All Tanks Bottom Plate 1/2” A36 Steel Plate
- (1) 1/4” A36 Steel Plate Baffles Run Full Length Of Tank
- (2) 1/4” A36 Steel Plate Baffles Spaced Evenly Through Tank Creating (4) Separate Department For Precise Water Flow Through All (4) Compartments
- Fenders Are Integrated Into The Tank For Strength
- 3” Anti Syphon Fill Pipe At Ground Level For Filling
- 24” Square Man Hole For Filling & Tank Entry For Inspection
- Steps Mounted On Front Of Tank To Access Top Of Tank
- Full Lighting Package Mounted On Rear Of Tank
- 3 Front Spray Heads Independently Operated
- 4 Front Spray Heads Independently Operated
- 4 X 3 Hydraulically Operated Water Pump
- Stang U.S. Made Electric Remote Operated Cannon
- 50’ Hose Reel On Rear Of Tank
- In-Cab Operator Station With Controls For All Functions Including Joy Stick Control For Cannon
- Tank Is Installed Directly To Frame For the Lowest Possible Center Of Gravity
- Mounting Points On Front And Rear Of Tank To Prevent Side To Side Movement & Front to Rear Movement
- 1/4” Rubber Pad Installed Between Tank And Chassis Frame For Cushioning
